Steel Register Plates
An installation of a multifuel or wood burning stove requires a register plate, this makes a chimney fume-tight and prevents any debris caused by the stove or the flue falling back down onto your hearth. Our galvanised steel register plates are 1.5mm thick.
Each register plate needs to have a circular cut out in the centre to accommodate the stove pipe that goes through it. Once the pipe is in place it should be sealed with fire cement and Ceramic Fire Rope if necessary but always consult your Hetas qualified fitter for any installation advice. On the register plate you may require a lip, this will allow you to drill the plate to the inside of your chimney breast to secure the plate.
^^ top ^^
|
Frequently Asked Questions Disclaimer The information contained in this section of the website is for general information purposes only and is intended as a guide. The information is provided by Stoves Direct Ltd and whilst we endeavour to keep the information up-to-date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk. |
Click to Submit Feedback...
