01484 940 111
316/316 Grade Flue Liner:-A liner which uses 316 grade stainless steel for the inner and outer skins. It is suitable for use on stoves burning the following fuels:- gas, oil, coal, coke, seasoned dry logs, cured dry peat and some smokeless fuels. 316/316 grade flue liner has a lifetime guarantee (product replacement only)
Top Plate And Top Clamp:-The top plate and top clamp are used together as one a method of fixing the chimney liner at the top of the stack. It is necessary to remove the chimney pot, fit the chimney liner in place with the plate and clamp, and then refit the chimney pot once installed. The chimney liner passes through the hole in the plate and is gripped in place with the top clamp. For a secure fixing, it's recommended to use a top sleeve. The top sleeve fits inside the top of the chimney liner and gives a solid inner for the top clamp to grip against.
8” - 8” Liner Adaptor:-The liner adaptor is manufactured from 316 grade stainless steel. The adaptor is used to connect flexible chimney liner to the flue pipe at the base of the flue. You can see that on the top of the adaptor their are two skins and the liner connects between these two skins. The inner skin is slightly longer to prevent snagging and reduce strain on this joint when sweeping.
7” - 8” Liner Adaptor:-The increaser adaptor is very similar to the standard liner adaptor. It is used to connect the flexible chimney liner to a 1" smaller diameter flue pipe at the base of the flue. You can see that on the top of the adaptor their are two skins and the liner connects between these two skins. The inner skin is slightly longer to prevent snagging and reduce strain on this joint when sweeping.
To connect the liner to the adaptor, you will require some stainless steel self tapping screws. Drill some pilot holes through the outer skin of the adaptor and secure the liner in place. Complete the joint by sealing between the liner and outer skin of the adaptor with fire cement.
On the inner of the adaptor there is a hole. This allows any moisture running down the inside of the liner to drain. The idea is that all moisture and deposits stay on the inside of the completed installation.
Please note:It is recommended when installing a flue system, you increase the flue diameter by 1” (7” flue size will increase to 8” flue liner)
Please be aware that we may not be able to accept the return of flue liner due to it being cut to size.
You will need access to the flue liner for sweeping purposes when using oil or solid fuel fired appliances. It is sometimes possible to sweep through the stove by removing the baffle plate at the top of the stove. If this is not possible, you will need to provide the access via a sweeping hatch in the stove pipe.
Come visit one of our showrooms and explore our wonderful ranges, you'll receive a warm welcome and expert advice from our fully trained showroom team. Some of our products are only available to buy from our showroom so come down and grab a bargain, please feel free to phone before setting off to check what we have on display.
Our showroom in Halifax has a wide variety of Fires, Fireplaces, Stoves, BBQs & Range Cookers to view, we have multiple live displays for you to see including wood burning, electric & bio-ethanol fuel types. Our extensive range is guaranteed to suit any home interior from stylish electric fire suites to traditional log burners and period fireplaces. Our large cooking displays should satisfy your culinary needs from large range cookers and BBQs from industry-leading manufacturers we'll have something in-store that will suit your needs.
We always recommend calling our friendly staff to check on product availability as all our stock can change daily.
The Old Canteen, Rosemount Works, Huddersfield Road, Elland, HX5 0EE
Our newest showroom, located in Bamber Bridge near Preston; only 2 minutes drive from junctions on the M6, M61 and M65. We have live displays of log burners, gas stoves and electric fires & fireplaces alongside a small selection of range cooking appliances and BBQs. This store will be used as a click and collect point for our customer base in Lancashire with regular events including training days and cooking experiences. Come talk to our trained HETAS & Gas Safe advisors. Come to see us for an in-store experience like no other.
Unit 28 Dollywaggon Way (Off Craven Dr), Bamber Bridge, Preston, PR5 6DA